How to Fix a " Stuck in Automatic Repair " Loop in Windows 10

The following is how the problem repair tool causes problems on the PC, Such as ” Automatic Repair Loop”.

If you have ever encountered an error and don’t know what to do, Windows 10 comes with a troubleshooting tool to fix the error for you. One of these handy tools is an Automatic Repair tool. This is a convenient repair function that can repair problems that prevent you from starting normally.

But what if the tool itself causes the error? If your PC is Stuck in Automatic Repair cycle, we have compiled a list of solutions to repair your error.

What Is an Automatic Repair Loop and What Causes It?

The Automatic Repair cycle is an error that occurs when Windows 10 tries to start and fails, then forcibly starts the Automatic Repair tool and tries to repair itself. If Windows cannot repair itself, it restarts and repeats itself in an endless loop.

There is more than one reason for the Automatic Repair loop in Windows 10, and it is difficult to figure out. The most common reason is that system files are missing or damaged. Windows cannot start or repair these files on its own because these critical files that it needs to run are not available.

Lack of device drivers is usually one of the main causes of errors. If you recently updated your PC, your new components will require device drivers for Windows to use them. If drivers are missing, out of date, or unsupported, they may cause a repair loop. If the driver is not installed correctly, a new peripheral device can also cause this error.

Other possible causes are usually related to faulty components, malware infection, system registry corruption, and even installation file corruption. However, you don’t need to worry, because our solution works for most Windows 10 auto-repair loop causes.

1. Run Fixboot and Chkdsk Commands

If you cannot determine the cause of the Windows 10 Automatic Repair loop, you can use some system repair tools to try to repair it. The chkdsk command uses the check disk utility to start a low-level check of the system drive for errors. If it detects errors, it will fix them automatically.

Even if Windows fails to start, you can still use the Advanced Options menu screen to force Windows to start from a command prompt window.

For this:

Restart your PC and press the F8 key on your keyboard before the Windows logo and spinning icon appear. This will cause the Windows boot troubleshooting menu to appear. Select See advanced repair options to begin.
From the Choose an option screen, select Troubleshoot > Advanced options > Command Prompt.
In the Command Prompt window, type the following command and press Enter:
```
chkdsk c: /r
```
If the chkdsk command fails, you can also try using the Fixboot command. In the same Command Prompt window, enter the following command and press Enter:
```
fixboot c:
```
Once you are finished, close the Command Prompt window and restart your PC.

2. Perform a System Scan in Safe Mode

If the system repair tool finds damaged files, Windows will replace these files with the local image. However, if the image itself is damaged, Windows will not be able to repair itself and cause the previous command to fail. To solve this problem, we can use the DISM (Deployment Image Service and Management) tool.

In order to be able to use this tool, we must first enable safe mode. This will load a basic version of Windows without third-party programs to help you resolve startup errors.

The first step, like before, is to restart your PC and press the F8 key while booting to open the Windows boot troubleshooting menu.
Select See advanced repair options > Troubleshoot > Advanced options > Startup Settings > Restart.
Now, you will see a list of various restart options. Choose Enable Safe Mode with Networking by selecting F5 on your keyboard.
Once Windows boots up in Safe Mode, right-click the Start menu and select Windows PowerShell (Admin).
In the PowerShell window, type the following command and press Enter:
```
DISM /Online /Cleanup-Image /RestoreHealth
```
This will take some time to finish. When the DISM tool finishes running, reboot your PC and follow the above steps to open the PowerShell window in Safe Mode again.
This time, type the following command and press Enter:
```
sfc /scannow
```
This will check the integrity of Windows system files and allow us to verify if Windows is fully repaired.

3. Restore the Windows Registry

Sometimes malware infection or hard drive problems can also cause registry file corruption.

To fix registry problems, you can take the following steps to restore them:

Open the Windows boot troubleshooting menu.
Select See advanced repair options > Troubleshoot > Advanced options > Command Prompt.

Type the following command and press Enter:

C:\Windows\System32\config\regback* C:\Windows\System32\config\

If you are asked to overwrite files, type All and press Enter.
Once you are finished, restart your PC.

4. Disable Automatic Repair Tool

If you think your Windows is working properly, you can try to disable the automatic startup repair system. This should allow you to boot into Windows without entering a repair loop. However, this only works if your Windows system is working properly. You can use it to determine whether your Windows is really to blame.

To turn off the Automatic Repair tool for Windows 10, do the following:

Open the Windows boot troubleshooting menu.
Select See advanced repair options > Troubleshoot > Advanced options > Command Prompt.
Type the following command and press Enter: bcdedit
Check the values for identifier and recoveryenabled. The identifier value should be {default} and recoveryenabled should be yes.

Now, type this command and press Enter:

bcdedit /set {default} recoveryenabled no

This will disable the automatic boot repair. If the command doesn’t work, try the following command:
```
bcdedit /set {current} recoveryenabled no
```
Once you are finished, restart your PC.

5. Reset Your Windows 10 Device

The last resort for the computer to get into an Automatic Repair startup loop is to reset Windows 10. You don’t need to worry about losing files and data, because you can choose to use a clean reset (delete everything) to continue or get your files.

To reset a Windows 10 PC, open the Windows troubleshooting startup menu and select Troubleshooting> Reset this PC.

How to Fix a "Stuck in Automatic Repair" Loop in Windows 10

Dealing With the Automatic Repair Loop

Because of the tools designed to solve your problem, it can be frustrating to find yourself stuck in an endless loop. Diagnosis and understanding can be difficult, but our solution will definitely help you and restore your PC to normal.